Unpacking the Power Supplies
Unpacking the Power Supplies
The SSA‐AC‐PS‐625W and SSA‐AC‐PS‐1000W power supply modules are shipped in boxes
separate from the SSA. To unpack a power supply:
1.
Unpack the power supply by removing it from the shipping box and sliding the two foam end
caps off the unit.
Save the shipping box and materials in the event the unit must be reshipped.
2.
Verify the contents of the box using Table
3.
Remove the power supply from its protective plastic bag.
4.
Examine the power supply carefully, checking for damage.
If there are any signs of damage, DO NOT install the power supply; instead, contact Enterasys
Networks. Refer to "Getting Help" on page xvii for details.
Table 2-2 Contents of SSA Power Supply Carton
Item
Power supply (SSA-AC-PS-625W or SSA-AC-PS-1000W)
For USA shipments: NEMA Power Cord 6-20, C19, R/A, SHLD
Type of power cord is dependent on country of installation.
NOTICE Card
2-12 Installation
2‐2.
Quantity
1
1
1