3.
Set the side panel upside down to view the label on the inside of the rear panel that indicates
the position of each fan. See Figure
Figure 3-12
Underside of the SSA Rear Panel
4.
Remove the failed fan from the SSA. See Figure
a.
Lift the failed fan out the SSA.
Figure 3-13
Disconnecting an F11–F13 Fan (Fan F11 Example)
1
Fan F11 connector
3‐12.
3‐13.
2
Fan F11
Enterasys S-Series Stand Alone (SSA) Hardware Installation Guide 3-15
Replacing the SSA Fans
3
Rubber grommet