Removing The Rear Panel; Replacing Fans F11–F13 - Enterasys SSA-T1068-0652 Hardware Installation Manual

Replacing the SSA Fans
Replacing Fans F11–F13
To replace an F11–F13 fan:
1. Put on the ESD wrist strap and attach it to the ground receptacle on the front of the SSA.
2. Remove the rear panel of the SSA by unscrewing the four zinc (silver) screws from the rear
panel. See Figure
Figure 3-11
3-14 Troubleshooting
3‐11.

Removing the Rear Panel