Underside Of The Ssa Side Panel; Disconnecting An F1-F7 Fan (Fan F3 Example) - Enterasys SSA-T1068-0652 Hardware Installation Manual

Replacing the SSA Fans
3. Set the side panel upside down to view the label on the inside of the side panel that indicates
the position of each fan. See Figure
Figure 3-6
4. Remove the failed fan from its position in the SSA.
5. Disconnect the failed fan from its connector, located to the right of the fan. See Figure
Figure 3-7
1 Fan F3 connector
3-10 Troubleshooting

Underside of the SSA Side Panel

Disconnecting an F1–F7 Fan (Fan F3 Example)
3‐6.
2 Fan F3
3‐7.