Mpls L3Vpn Configuration Task List; Configuring Basic Mpls L3Vpn; Configuration Prerequisites; Configuring Vpn Instances - HP MSR2000 Configuration Manual

Msr series mpls
Hide thumbs Also See for MSR2000:
Table of Contents

Advertisement

MPLS L3VPN configuration task list

Tasks at a glance
(Required.)
(Optional.)
(Optional.)
(Optional.)
(Optional.)
(Optional.)
(Optional.)
(Optional.)
(Optional.)
(Optional.)

Configuring basic MPLS L3VPN

Tasks at a glance
Configuring VPN
(Required.)
(Required.)
(Optional.)
(Required.)
(Required.)
(Optional.)

Configuration prerequisites

Before you configure basic MPLS L3VPN, complete the following tasks:
1.
Configure an IGP on the PEs and P devices to ensure IP connectivity within the MPLS backbone.
2.
Configure basic MPLS for the MPLS backbone.
3.
Configure MPLS LDP on the PEs and P devices to establish LDP LSPs.

Configuring VPN instances

VPN instances isolate VPN routes from public network routes and routes among VPNs. This feature
allows VPN instances to be used in network scenarios besides MPLS L3VPNs.
All VPN instance configurations are performed on PEs or MCEs.
Creating a VPN instance
A VPN instance is a collection of the VPN membership and routing rules of its associated site. A VPN
instance might not correspond to one VPN.
Configuring basic MPLS L3VPN
Configuring inter-AS VPN
Configuring nested VPN
Configuring HoVPN
Configuring an OSPF sham link
Configuring routing on an MCE
Specifying the VPN label processing mode on the egress PE
Configuring BGP AS number substitution and SoO attribute
Enabling SNMP notifications for MPLS L3VPN
Configuring MPLS L3VPN FRR
instances:
Creating a VPN instance
Associating a VPN instance with an interface
Configuring route related attributes for a VPN instance
Configuring routing between a PE and a CE
Configuring routing between PEs
Configuring BGP VPNv4 route control
188

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents