HP MSR2000 Configuration Manual page 328

Step
4. Enable IPv6 for the IPv6 IS-IS
process.
5. (Optional.) Redistribute remote
site routes advertised by the PE.
6. Return to system view.
7. Enter interface view.
8. Enable the IPv6 IS-IS process
on the interface.
Configuring EBGP between an MCE and a VPN site
To use EBGP between an MCE and IPv6 VPN sites, you must configure a BGP peer for each IPv6 VPN
instance on the MCE, and redistribute the IGP routes of each VPN instance on the IPv6 VPN sites. You
can also configure the filtering of received and advertised routes.
1. Configure the MCE:
Step
1. Enter system view.
2. Enter BGP view.
3. Enter
view.
4. Specify an IPv6 BGP peer in
an AS.
5. Enter BGP-VPN IPv6 unicast
address family view.
6. Enable BGP to exchange
IPv6 unicast routes with the
specified peer.
7. Redistribute
routes advertised by the PE.
8. (Optional.)
filtering of advertised routes.
9. (Optional.)
filtering of received routes.
2. Configure a VPN site:
Command
system-view
bgp as-number
BGP-VPN instance
ip vpn-instance
vpn-instance-name
peer { group-name |
ipv6-address } as-number
as-number
address-family ipv6 [ unicast ]
peer { group-name | ip-address }
enable
import-route protocol
[ { process-id | all-processes }
remote site
[ allow-direct | med med-value |
route-policy route-policy-name ]
* ]
filter-policy { acl6-number |
Configure
prefix-list ipv6-prefix-name }
export [ protocol process-id ]
filter-policy { acl6-number |
Configure
prefix-list ipv6-prefix-name }
import
Command
ipv6 enable
ipv6 import-route protocol
[ process-id ] [ allow-ibgp ]
[ allow-direct | cost cost | [ level-1
| level-1-2 | level-2 ] |
route-policy route-policy-name |
tag tag ] *
quit
interface interface-type
interface-number
isis ipv6 enable [ process-id ]
319
Remarks
By default, IPv6 is disabled.
By default, no routes are
redistributed to IPv6 IS-IS.
If you do not specify the route level
in the command, redistributed
routes are added to the level-2
routing table.
N/A
N/A
By default, no IPv6 IS-IS process is
enabled.
Remarks
N/A
N/A
N/A
By default, no BGP peer is
configured.
N/A
By default, BGP does not
exchange IPv6 unicast routes
with any peer.
By default, no route redistribution
is configured.
By default, BGP does not filter
advertised routes.
By default, BGP does not filter
received routes.