HP MSR2000 Configuration Manual page 429

[PE2] xconnect-group vpn1
[PE2-xcg-vpn1] connection ldp
[PE2-xcg-vpn1-ldp] ac interface gigabitethernet 2/1/1
[PE2-xcg-vpn1-ldp] peer 192.3.3.3 pw-id 1000
[PE2-xcg-vpn1-ldp-192.3.3.3-1000] quit
[PE2-xcg-vpn1-ldp] quit
[PE2-xcg-vpn1] quit
6. Configure CE 2.
<CE2> system-view
[CE2] interface gigabitethernet 2/1/1
[CE2-GigabitEthernet2/1/1] ip address 100.1.1.2 24
[CE2-GigabitEthernet2/1/1] quit
Verifying the configuration
# Display L2VPN PW information on PE 1. The output shows that an LDP PW has been created.
[PE1] display l2vpn pw
Flags: M - main, B - backup, H - hub link, S - spoke link, N - no split horizon
Total number of PWs: 1, 1 up, 0 blocked, 0 down, 0 defect
Xconnect-group Name: vpn1
Peer
192.2.2.2
# Display L2VPN PW information on ASBR 1. The output shows that two LDP PWs have been created to
form a multi-segment PW.
[ASBR1] display l2vpn pw
Flags: M - main, B - backup, H - hub link, S - spoke link, N - no split horizon
Total number of PWs: 2, 2 up, 0 blocked, 0 down, 0 defect
Xconnect-group Name: vpn1
Peer
192.1.1.1
192.3.3.3
# Display L2VPN PW information on ASBR 2. The output shows that two LDP PWs have been created to
form a multi-segment PW.
[ASBR2] display l2vpn pw
Flags: M - main, B - backup, H - hub link, S - spoke link, N - no split horizon
Total number of PWs: 2, 2 up, 0 blocked, 0 down, 0 defect
Xconnect-group Name: vpn1
Peer
192.2.2.2
192.4.4.4
# Display L2VPN PW information on PE 2. The output shows that an LDP PW has been created.
[PE2] display l2vpn pw
Flags: M - main, B - backup, H - hub link, S - spoke link, N - no split horizon
Total number of PWs: 1, 1 up, 0 blocked, 0 down, 0 defect
PW ID In/Out Label
1000 1151/1279
PW ID In/Out Label
1000 1279/1151
1000 1278/1151
PW ID In/Out Label
1000 1151/1278
1000 1150/1279
Proto Flag
LDP M
Proto Flag
LDP M
LDP M
Proto Flag
LDP M
LDP M
420
Link ID State
1 Up
Link ID State
0 Up
1 Up
Link ID State
0 Up
1 Up