Configuring Rsvp Refresh; Configuring Rsvp Srefresh And Reliable Rsvp Message Delivery; Configuring Rsvp Hello Extension - HP MSR2000 Configuration Manual

Configuring RSVP refresh

Step
1. Enter system view.
2. Enter RSVP view.
3. Configure the refresh interval
for Path and Resv messages.
4. Configure the PSB and RSB
timeout multiplier.
Configuring RSVP Srefresh and reliable RSVP
message delivery
After Srefresh is enabled, RSVP maintains the path and reservation states by sending Srefresh messages
rather than standard refresh messages.
To configure Srefresh and reliable RSVP message delivery:
Step
1. Enter system view.
2. Enter interface view.
3. Enable Srefresh and reliable
RSVP message delivery.
4. Configure the retransmission
increment value for reliable
RSVP message delivery.
5. Configure the retransmission
interval for reliable RSVP
message delivery.

Configuring RSVP hello extension

When RSVP hello extension is enabled on an interface, the device receives and sends hello messages
through the interface to detect the neighbor's status.
Command
system-view
rsvp
refresh interval interval
keep-multiplier number
Command
system-view
interface interface-type
interface-number
rsvp reduction srefresh
[ reliability ]
rsvp reduction retransmit
increment increment-value
rsvp reduction retransmit interval
retrans-timer-value
147
Remarks
N/A
N/A
By default, the refresh interval is 30
seconds for both path and Resv
messages.
By default, the PSB and RSB
timeout multiplier is 3.
Remarks
N/A
N/A
By default, Srefresh and reliable
RSVP message delivery are
disabled.
By default, the RSVP message
retransmission increment is 1.
This command takes effect after
reliable RSVP message delivery is
enabled by using the rsvp
reduction srefresh reliability
command.
By default, the RSVP message
retransmission interval is 500
milliseconds.
This command takes effect after
reliable RSVP message delivery is
enabled by using the rsvp
reduction srefresh reliability
command.