HP MSR2000 Configuration Manual page 151

# Execute the display mpls lsp command or the display mpls static-cr-lsp command on each router to
display static CRLSP information.
[RouterA] display mpls lsp
FEC
1.1.1.1/0/1
2.1.1.2
[RouterB] display mpls lsp
FEC
-
3.2.1.2
[RouterC] display mpls lsp
FEC
-
[RouterA] display mpls static-cr-lsp
Name LSR Type
static-cr-lsp-1 Ingress
[RouterB] display mpls static-cr-lsp
Name LSR Type
static-cr-lsp-1 Transit
[RouterC] display mpls static-cr-lsp
Name LSR Type
static-cr-lsp-1 Egress
# Execute the display ip routing-table command on Router A. The output shows a static route entry with
interface Tunnel 0 as the output interface. (Details not shown.)
Proto In/Out Label
StaticCR -/20
Local -/-
Proto In/Out Label
StaticCR 20/30
Local -/-
Proto In/Out Label
StaticCR 30/-
In/Out Label Out Interface
Null/20 GE2/1/1
In/Out Label Out Interface
20/30 GE2/1/2
In/Out Label Out Interface
30/Null -
142
Interface/Out NHLFE
GE2/1/1
GE2/1/1
Interface/Out NHLFE
GE2/1/2
GE2/1/2
Interface/Out NHLFE
-
State
Up
State
Up
State
Up