I/O Allocation - Panasonic FP2 -C1A Manual

FP2 Analog Unit
4.2

I/O Allocation

During sequence program processing with the FP2, the analog input and output data is
allocated to the I/O (X, Y) and refreshed. The I/O allocation for the analog input and
output data is as shown in the table below.
CPU unit with analog I/O
Analog input g p
Analog output
Analog input unit
Analog input g p
Analog output unit
Analog output g p
The I/O number shown by an "n" in the table above is determined according to the
installed slot position and the I/O allocation for other units.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
Channel
Ch 0
Ch 1
Ch 2
Ch 3
Ch 0
Channel
Ch 0
Ch 1
Ch 2
Ch 3
Ch 4
Ch 5
Ch 6
Ch 7
Channel
Ch 0
Ch 1
Ch 2
Ch 3
Setting the I/O Range and I/O Allocation
4.2
I/O Number
WX0: X0 to XF
WX1: X10 to X1F
WX2: X20 to X2F
WX3: X30 to X3F
WY4: Y40 to Y4F
I/O Number
WX(n): X(n)0 to X(n)F
WX(n+1): X(n+1)0 to X(n+1)F
WX(n+2): X(n+2)0 to X(n+2)F
WX(n+3): X(n+3)0 to X(n+3)F
WX(n+4): X(n+4)0 to X(n+4)F
WX(n+5): X(n+5)0 to X(n+5)F
WX(n+6): X(n+6)0 to X(n+6)F
WX(n+7): X(n+7)0 to X(n+7)F
I/O Number
WY(n): Y(n)0 to Y(n)F
WY(n+1): Y(n+1)0 to Y(n+1)F
WY(n+2): Y(n+2)0 to Y(n+2)F
WY(n+3): Y(n+3)0 to Y(n+3)F
I/O Allocation
4 - 5