Cpu Unit With Analog I/O (Fp2 - C1A) - Panasonic FP2 -C1A Manual

FP2 Analog Unit
2.1

CPU Unit with Analog I/O (FP2 - C1A)

1
2 3
4
6
5
ront
F
Status indicator LEDs
1
display the operating condition and error statuses.
Mode selector
2
is used to change the operation mode.
Initialize/test switch
3
is used to clear the errors, initializes the operation memory and set the test operation
mode.
Analog input terminals
4
For CPU unit with analog I/O, there are analog input terminals for channels 0 to 3.
The terminal block can be removed to facilitate wiring.
For detailed information
Tool port (RS232C)
5
is used to connect a programming tool.
COM port (RS232C)
6
is used to connect a computer or general- serial devices with RS232C port.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
8
k
Bac
7
section 3.1.2
2.1 CPU Unit with Analog I/O (FP2 - C1A)
9
Parts and Specifications
10
next page
2 - 3