Connection With The Joystick Unit; Connecting The Ac Adapter - Panasonic WV-CU980/G Operating Instructions Manual

Before Operation

Connection with the Joystick Unit

Connect the cable of the joystick unit to the joystick connector terminals [JOYSTICK] at the back of the main unit.
Important:
• A "Serial number label" is affixed to the bottom surface of the main unit and of the joystick unit.
Connect a main unit and a joystick unit having the same number in the respective "Serial number labels".
Main Unit

Connecting the AC adapter

Connect the power supply cord (accessory) to the AC adapter (accessory), and connect the DC plug of the AC adapter to the
power supply terminals at the back of the main unit.
Important:
• Insert the DC plug fully inside so that it does not become loose or gets detached.
• In order to prevent the DC plug from getting detached, securely fix the DC cable using the cable clamp provided as an
accessory.
Power supply plug
Power supply
cord (accessory)
AC adapter
(accessory)
(continued)
Cable
Power supply
terminal
DC plug
DC Cable
Joystick unit
Method of preventing DC plug
from getting detached
① Pass the cable clamp (accessory) through the upper hole of
the clamp mount.
② Provisionally fix the DC cable using the cable clamp.
③ Fix the DC cable by tightening the cable clamp at about
8 cm to 9 cm from the DC plug. If necessary, cut the
excess portion of the cable clamp.
Clamp mount
8 cm to 9 cm
Cable clamp
14