109: Print Ribbon Problem; 110: Print Ribbon Out Or Missing; 111: Card Not Picked; 112: Card Hopper Empty - DataCard CD800 User Manual

109: Print ribbon problem

The print ribbon is not moving properly.
1.
Open the printer and remove the ribbon cartridge.
2.
Reposition, repair, or replace the ribbon and advance the repaired area one full turn.
3.
Replace the ribbon cartridge and close the printer.
Press the U button on the printer to clear the message. On the PC, click Retry, or click Cancel to
SER
cancel the card.

110: Print ribbon out or missing

The printer does not have usable ribbon. To complete the current card:
1.
Open the printer and remove the ribbon cartridge.
2.
Install a new ribbon and cleaning roller.
3.
Replace the cartridge and close the printer.
Press the U button on the printer to clear the message. On the PC, click OK, or click Cancel to
SER
cancel the card.
H & T
INTS IPS
Used ribbon has negative images of printed data. To keep the data confidential, follow your
company policy to discard used ribbon.

111: Card not picked

The printer did not pick a card. To complete the current card:
For printers with an input hopper, open the input hopper, add or reposition cards, and close the
hopper.
For printers with single card feed, push the card in until the printer picks it.
Press the U button on the printer to clear the message. On the PC, click OK, or click Cancel to
SER
cancel the card.

112: Card hopper empty

The printer did not detect cards in the input hopper.
Add cards to the input hopper.
Press the U button on the printer to clear the message. On the PC, click OK, or click Cancel to
SER
cancel the card.
CD800 Card Printer User's Guide 69