Embosser Replacement Parts
The following replacement parts are available for the embosser.
Indent Ribbon Cartridge
The indent ribbon cartridge holds the indent
ribbon.
Topping Foil Cartridge
The topping foil cartridge holds the topping foil
used on the embossed characters.
Embosser Power Supply
The embosser power supply is rated as follows:
Input: 110–240V, 50–60Hz, 3.5A
Output: 24V, 10.42A, 250W
It is self-adjusting within the rated input voltage.
Power Cords
Refer to
"Power Cords"
CR825 and CE875 Instant Issuance System Installation and Administrator's Guide
on
page 104
for a list of available power cords.
Indent Cartridge
Topping Foil
Cartridge
A-19