DataCard CR825 Installation And Administrator's Manual page 79

Printer Setting Menu
Option
FrontPanel
Print
Pick
Transport
VertTransport
Flipper
BarcodeReader
CardStock
HeatRoller
CR825 and CE875 Instant Issuance System Installation and Administrator's Guide
Function
Set front panel values for
the printer.
Select a color mode and set
the supply rewind timeout
period.
Display and set pick values.
Available to WebService
access level users only.
Set the number of attempts
to eject a card, and display
the transport motor speed.
Display the speed at which
the vertical transport
motor runs when clearing
errors.
Set the reject tray capacity
and values for the duplex
module in duplex-option
printers. Most settings are
available to WebService
access level users only.
Set the offset values for
positioning a card to be
read by the bar code
reader.
Set values for each type of
card stock supported by the
printer.
Set the time (in minutes)
the printer is idle before
power to the heated roller
is turned off.
WebUser
Change Backlight
Brightness,
KeySenseLevel and
SpeakerEnabled
values
No
No
View only:
TransMedSpeedMM
View
VertTransMedSpeed
No
No
Change all Current
Values
Change all Current
Values
WebAdmin
Change all Current
Values
Change all Current
Values
No
View only:
TransMedSpeedMM
Change:
EjectFrontRetries
View
VertTransMedSpeed
Change:
RejectHopper
Capacity
No
Change all Current
Values
Change all Current
Values
63