Assemble The Printer And Embosser - DataCard CE840 Quick Install Manual

CE840 Instant Issuance System Quick Install Guide

3. Assemble the Printer and Embosser

a. Locate the interconnect cable in the cable routing
area of the embosser, and make sure that it remains
accessible.
b. Slide the printer locking lever inside the embosser to the
left to move the mounting lock to the unlocked position.
c. Lift the printer over the embosser and align the pins on
the embosser with the holes on the underside of the
printer.
d. Press down carefully, but firmly, on the printer to
position it.
e. Push the printer locking lever to the right to lock the
printer to the embosser. Make sure that the printer is
locked securely to the embosser.
7
Printer Locking
Lever
Interconnect
Cable
CE840 Instant Issuance System