Table of Contents
Advertisement
Cables and Power Supplies
The following cables and power supplies are used by the printer.
Data Cable
The Ethernet data cable connects the printer to the network.
Use a standard Ethernet network cable, either a Cat 5 or Cat 5e cable, to connect the printer to a
network port.
Ethernet cables are not available from Entrust Datacard. You can purchase a cable
from a third-party supplier.
Printer Power Supply
The printer power supply is rated as follows:
Input: 110–240V, 50–60Hz, 1.5A
Output: 24V, 6.6A, 160W
It is self-adjusting within the rated input voltage.
CR825 and CE875 Instant Issuance System Installation and Administrator's Guide
103
Advertisement
Table of Contents
