Selecting Pictures On Your Camera For Printing - Kodak EasyShare User Manual

Printing without a computer
IMPORTANT: Do not pull out the print. The printer dock automatically ejects the finished
print after the fourth pass.

Selecting pictures on your camera for printing

NOTE: The following procedure pertains to Kodak EasyShare digital cameras. For information on tagging
pictures on other brands of ImageLink system-compatible cameras, see the camera user's guide.
1 Press the Share button on your camera.
2 Press to locate a picture.
3 Make sure Print
location for printing, press
4 Press to select the number of copies (0–99). The default is one. Zero
removes the tag for a selected picture.
I To apply a print quantity to other pictures, press
the print quantity as is, or press
5 Press the OK button.
6 Press the Share button to exit.
12
The paper cycles four times during the printing
process. The first three passes apply layers of yellow,
magenta, and cyan colors to the print, and the fourth
pass applies the Kodak XtraLife
and preserves the image.
is highlighted. (To tag all pictures in the current image storage
to highlight Print All.) Press the OK button.
TM
to locate them. Keep
to change it.
www.kodak.com/go/support
coating that protects