Maintaining The Printer; Performing Routine Maintenance; Cleaning The Exterior - Kodak 6900 User Manual

3

Maintaining the Printer

Performing Routine Maintenance

Cleaning the Exterior

October 2020
To ensure good printer performance and high-quality prints, make
sure the Photo Printer and its environment are clean and dust free.
To maintain good print quality, clean the exterior (see
the printer regularly to eliminate dust buildup and prevent debris
from entering the printer.
Make sure you have the KODAK Thermal Printer Cleaning Kit
available. This kit contains 10 individually packaged alcohol pads.
CAUTION:
Alcohol is a flammable liquid. It can cause eye irritation and
dry skin. Wash your hands with soap and water following
any maintenance procedures where you use alcohol pads.
For additional information, see the Material Safety Data
Sheet (MSDS).
1. Move the power switch to the Off ( ) position.
2. Remove the:
• exit tray - if installed
• trim tray -
3. Empty the trim tray.
4. Wipe the exterior of the printer, exit tray, and trim tray with a
damp, lint-free cloth.
5. Insert the trim tray and exit tray (if present).
6. Move the power switch to the On ( | ) position.
A190_0029
See "Removing the Trim Tray" on page 2-6.
page 3-1) of
3-1