Apollo RoadRunner HD User Manual And Instruction Manual page 39

Selecting DHCP from the Type and selecting Apply button reads the current IP address of the Recorder configured
by DHCP (Dynamic Host Configuration Protocol) network.
Select Auto (Default) to toggle between On and Off. When it is On, the Recorder will obtain the IP address of the DNS
server automatically.
NOTE: Selecting Auto will only be enabled when the Recorder is configured for DHCP network.
FEN
PATH: Network menu > FEN
Select Use FEN to toggle between On and Off.
NOTE: FEN is the technology that automatically sets up Recorder to work seamlessly for remote viewing via
the network internet connection. For FEN to work, naming the Recorder will be required.
Select the box beside FEN Server enter the IP address or domain name of the FEN server.
NOTE: Obtain the IP Address or domain name of the FEN Server from the network administrator.
Use the domain name instead of IP address if already set up the DNS Server.
Select the box beside Port and set the port number of the FEN server using the Up and Down arrow buttons to increase
or decrease the numbers. Select the keyboard symbol
Select the box beside FEN Name and enter the Recorder name to be registered on the FEN server.
Select the Check box to check whether or not the name entered can be used.
RoadRunner HD™ | High Definition Mobile Recorder
to change the settings. The factory default port setting is 10088.
33