Apollo RoadRunner HD User Manual And Instruction Manual page 23

Monitoring
PATH: System menu > Monitoring
The Recorder can be configured to run self-diagnostics and report the results.
Select the Settings box beside the desired event (System, Check Recording, Check Alarm-In, Disk Almost Full,
Disk Bad, or Disk Temperature).
Select the Settings box beside System and then select the interval required for the Recorder to run self-diagnostics.
Select from 1 min. to 30 days or Never.
Select the Settings box beside Check Recording.
Select the Settings box beside Check Alarm-In.
Select the Settings box beside Disk Almost Full and select the percentage level of disk usage for the Recorder to
trigger an alert. Percentage levels range from 80% to 99%.
Select the Settings box beside Disk Bad and select percentage level of bad disk sectors for the Recorder to trigger an
alert. Percentage levels range from 10% to 90%.
Select the Settings box beside Disk Temperature and select the temperature of hard disk drive for the Recorder to
trigger an alert if the temperature exceeds the defined threshold. Refer to the hard disk drive manufacturer's
documentation for the correct temperature setting.
Selecting Schedule On toggles On and Off. When set to On, select the
day, time range and interval for the Recorder to run self-diagnostics. The
Interval can be selectable from 1 min. to 7 days or Never. Select the + to
add a schedule item. To delete a check recording schedule check the
Selecting the box under the Interval heading beside each alarm-in allows the user to
change the interval for the Recorder to run self-diagnostics on Alarm Inputs. Select
from 1 hr. to 30 days or Never.
RoadRunner HD™ | High Definition Mobile Recorder
.
17