Apollo RoadRunner HD User Manual And Instruction Manual page 31

Text-In
PATH: Event menu > Text-In
The Recorder can be set to react to text input from devices such as accelerometer or other onboard systems. This
screen allows configuration of the Recorder for each text-in device.
Select the box under Setup.
NOTE: The system performance might be affected when a large quantity of text inputs are detected from several
channels at the same time.
Select Setup... and configure RS232, RS485, USB-Serial or LAN ports by using the required settings.
Select the box beside Transaction Start and enter the Transaction Start string. Refer to the device manufacturer's
documentation for the text string that the device first sends when a transaction starts.
Select Any Character to toggle between On and Off.
NOTE: If Any Character is turned On, text in the Transaction Start box cannot be entered.
Select the box beside Transaction End and enter the Transaction End string. Refer to the device manufacturer's
documentation for the text string that the device sends when a transaction ends.
Select the more line(s) box, and select the number of additional lines of text to record. Choose from 0 to 10.
Select the box beside Line Delimiter and enter the character(s) the device uses to indicate the end of a line. Special
characters can be entered using ^ and a capital letter; e.g., ^J for NL (New Line), ^M for CR (Carriage Return). Refer
to the device manufacturer's documentation for line delimiter character(s).
Select the box beside Ignore String and enter any strings of text to be ignored. Refer to the device manufacturer's
documentation for text strings that the device sends during transactions that need to be ignored.
RoadRunner HD™ | High Definition Mobile Recorder
Select the box beside Port, and select from None, RS232
(1~2), RS485, USB-Serial (1~8) and LAN (1~16).
NOTE: If the Port is set to None, no changes to the
screen are possible.is not
NOTE: When using a USB to serial text-in device, do
NOT remove the USB cable from the port while the
system is running.
NOTE: Text-in data might be lost when the text-in
buffer is filled by simultaneous text-in data from all
16 LAN channels.
25