Apollo RoadRunner HD User Manual And Instruction Manual page 25

Configure the camera's recording and remote compression method, resolution, picture quality, transfer speed, and ips
speed settings.
Select the box beside Camera Channel and select the camera number to configure a unique video profile. Selecting
the Copy to Camera box applies the video profile settings of the camera selected under Camera Channel to the
selected camera.
Select the box under Encode. The compression method supports H.264.
Select the box under Resolution and select a resolution supported by the camera. Maximum available resolution is
chosen automatically based on the selected video profile.
Select the box under Quality and select from Very High, High, Standard, or Low. Assign different Quality settings to
different cameras.
Select the box under Bitrate and select between CBR (constant bitrate) and VBR (variable bitrate). Transmitted data
size is fixed with CBR but varies depending on the amount of movement in the images with VBR.
Select the box under ips (images per second) and select between 1 and 30. Maximum ips available is determined
automatically based on the selected video profile.
Selecting Use Dynamic Live Stream will automatically transmits the Live (Single, 2x2, 3x3 and 4x4 screen) stream,
depending on the remote program's live screen layout.
Audio
PATH: Camera menu > Audio
Selecting the box under Audio allows configuration of audio settings for each channel.
Selecting the box under Audio In Source allows you to select the audio input source between Direct (Camera) and
MIC 1 or MIC 2 (MIC 1 or MIC 2 port on the rear panel of the Recorder).
Select the box beside Audio Codec and select the audio codec between G.711
u-Law and G.726.
Select Audio In to enable or disable audio for that camera.
Use the Volume slider to adjust the volume.
RoadRunner HD™ | High Definition Mobile Recorder
19