System Setup - Apollo RoadRunner HD User Manual And Instruction Manual

User Guide and Instruction Manual
Throughout the screens notice the Default button located on the left bottom corner. Selecting Default provides the
opportunity to reset that screen to its default settings. Select Apply or OK to apply the changes and exit the screen in
any setup. Select Cancel to exit the screen and no changes are saved.

System Setup

General
PATH: System menu > General
Select the box beside Site and enter a Site Name.
Select the box beside Serial Number and enter the system serial number.
Select the box beside System ID, and change the number by selecting it and using the Up and Down arrows to increase
and decrease the number from 0 to 99. Select the keyboard symbol to change the settings.
Select the box beside Language and a drop-down menu displays the available languages. Select the desired language.
Selecting Clear All Data will clear all video data from the hard drive. A dialog box is provided to confirm or cancel
this operation. Clear All Data will not clear the System Log.
Date/Time
PATH: System menu > Date/Time
12