Network Setup - Apollo RoadRunner HD User Manual And Instruction Manual

Network Setup

General
PATH: Network menu > General
The Recorder supports two-way audio communication between a local system and a PC running RsM. Selecting the
box beside Remote Audio Channel selects the audio channel that sends audio to the remote site. Selecting Select
From Client will send audio of the channel selected from RsM.
NOTE: Depending on network conditions, audio might be interrupted or out of synchronization during
transmission.
Select Enable SSL for Transferring Data to toggle between On and Off. When it is On, the security of data except
video and audio transmitted for remote monitoring or remote recording can be enhanced by using the SSL (Secure
Sockets Layer) authentication. When using the SSL function, the Recorder cannot be connected with a remote program
which does not support the SSL function.
CAUTION: The remote connection will be disconnected temporarily after changing the SSL settings.
NOTE: This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit
(http://www.openssl.org/).
You can limit the network bandwidth settings so that system does not consume too much network bandwidth. Select
the box beside Network Bandwidth Limit and set the desired maximum bandwidth from 50Kbps to 1Gbps by using
the Up and Down arrows.
NOTE: When limiting the network bandwidth, the remote watch image on the PC running RsM might not be
displayed properly.
RoadRunner HD™ | High Definition Mobile Recorder
31