Apollo RoadRunner HD User Manual And Instruction Manual page 32

User Guide and Instruction Manual
Select the Case Sensitive box to toggle between On and Off. Refer to the device manufacturer's documentation to
determine if the text strings are Case Sensitive. If the device distinguishes between upper and lower case letters, make
certain the Case Sensitive box is turned On.
Select the box beside Time Out, and set the length of time to wait for a new text string. The Recorder will consider
a transaction complete if no new text strings are entered between the last text input and the dwell time out. Adjust the
Time Out dwell from 5 seconds to 15 minutes.
Each input can be given a title. Select the desired Title box and enter the title.
Select the box under Actions. The Recorder can be set to react to text input. Text input can be associated with cameras,
trigger an Alarm-Out and Alarm LED, and/or notify a number of different devices.
Video Analytics
PATH: Event menu > Video Analytics
Motion
Video motion detection can be turned On or Off for each camera.
Selecting the box under the Sensitivity heading allows adjustment of the Recorder's sensitivity to motion for Daytime
and Nighttime independently. There are five settings with 1 being the least sensitive and 5 being the most sensitive.
Selecting the box under the Zone heading displays the zone setup screen. Set up motion detection zones by selecting
or clearing blocks. Select the tool to use and set motion detection zones by dragging the mouse.
Adjust the minimum number of detection blocks that must be activated to trigger a motion alarm. Selecting the box
under the Min. Blocks heading allows adjustment of the minimum number of detection blocks for Daytime and Nighttime
independently. Smaller numbers provide greater sensitivity because fewer detection blocks must be activated.
26

(Select) or (Clear): Click to select or clear a block for motion detection.

or (One or All block): Click to select or clear one or all blocks at a time.

(Area): Click to select or clear several blocks of an area.

OK: Click to accept changes and closes Zone setup.

Cancel: Click to exits Zone setup without saving changes.