Record Setup - Apollo RoadRunner HD User Manual And Instruction Manual

User Guide and Instruction Manual
Upgrade
PATH: Camera menu > Upgrade
To upgrade the firmware of network cameras, select the box under the Firmware Upgrade and select the desired file.
Selecting the Upgrade button will install the selected firmware package. Selecting the Cancel button will close the
window without upgrading the firmware. If the upgrade package file is not installed on the Recorder properly, an
error message will pop up.
NOTE: The network camera reboots automatically after completing the upgrade.
The Recorder does not check the software version of the camera when upgrading.

Record Setup

General
PATH: Record menu > General
Selecting Overwrite toggles between On and Off. In the Overwrite mode, the Recorder records over the oldest video
data (on a first-in, first-out basis) once all available storage space has been used. When Overwrite is turned off, the
Recorder stops recording once all available storage space has been used.
The Recorder can record. Selecting Record Audio toggles between On and Off.
22