Initial Unit Setup - Apollo RoadRunner HD User Manual And Instruction Manual

User Guide and Instruction Manual

Initial Unit Setup

Before using the Recorder for the first time, establish the initial settings. Install the RsM Software Program (RoadRunner
Secure Management Software
The RsM program is provided with the product for remote operation. The Recorder can be accessed, configured and
managed by using RsM. The recording system is connected remotely via network connection.
 RsM Program: Allows set up of the Recorder, to monitor video of the Recorder and play back video recorded on
the system.
NOTE: Refer to the RsM Software manual for instructions on how to install the program and connect the Recorder
remotely.
The following description is for setting up the Recorder using the RsM program.
Run the RsM program, and log in. Enter a User and password. Enter the password (default: AVT7100) when logging
in the admin user.
In order to register a recorder, enter System -> RsM setup -> Device.... Use plus sign to add a device. Once the Recorder
is registered on the RsM program, select RsM Setup from the System menu, and the select Device.
NOTE: Refer to the RsM Software manual for instructions on how to register the Recorder on the RsM system.
Monitoring video of the Recorder system and playing back video recorded on the Recorder will also
be supported using RsM. Refer to the RsM manual for details.
10
TM
) on a PC and connect to the Recorder remotely.