Programming A Fleet Map - Radio Shack PRO-94 Owner's Manual

Note: When the scanner searches for transmissions,
you see Type I fleet and subfleet IDs such as
100-9 , 000-12
How do you know if the preset map you selected is cor-
rect? Listen to find out if you are following complete con-
versations. If not, try another preset map.

Programming a Fleet Map

1. Set the scanner for conventional scanning. Press
then
PROG
2. Press the number key of the bank where you want
to store the fleet map.
3. Repeatedly press
press . A trunked frequency you previously pro-
E
grammed appears.
4. Press
DATA
5. Repeatedly press
Then press
6. Press
DATA
7. Repeatedly press
for the first block, then press
block appears.
Block
8. Repeat Step 7 until you have selected a size code
for each desired block.
9. Press
SRC (LIMIT)
programming mode, tunes the data channel, then
searches using the map you programmed.
, or 400-8 .
.
TRUNK
8 8 8 8 9 9 9 9
or
. A preprogrammed fleet map appears.
8 8 8 8
or
.
E
.
8 8 8 8 9 9 9 9
or
. The scanner exits the trunking
Trunking Operation
until appears, then
E1
9 9 9 9
until
USr
to select the size code
. The next available
E
Size Code
,
100-12
appears.
55