Troubleshooting - Radio Shack PRO-94 Owner's Manual

1000-channel handheld trunking scanner
Hide thumbs Also See for PRO-94:
Table of Contents

Advertisement

ˆ

Troubleshooting

If your scanner is not working as it should, these sugges-
tions might help you eliminate the problem. If the scan-
ner still does not operate properly, take it to your local
RadioShack store for assistance.
Problem
Scanner is on but
will not scan.
Scanner is totally
inoperative.
The scanner's
display dims or
the scanner
sounds a tone
every 15
30 sec-
onds.
Possible Cause
SQUELCH is not
adjusted cor-
rectly.
Only one channel
or no channels
are stored.
No power.
The AC adapter
or DC adapter is
not connected.
Batteries are not
correctly
installed.
The batteries are
weak.
Troubleshooting
Remedy
Adjust SQUELCH.
Store frequencies
into more than one
channel.
Check the batteries
or make sure the
AC adapter or DC
adapter is con-
nected properly.
Recharge the
rechargeable bat-
teries or replace the
non-rechargeable
batteries.
Be sure the
adapter's barrel
plug is fully plugged
into the 9V 300 mA
jack.
Make sure the bat-
teries are installed
properly.
Recharge the
rechargeable bat-
teries or replace the
non-rechargeable
batteries.
65

Advertisement

Table of Contents
loading

This manual is also suitable for:

20-524

Table of Contents