Using The Keylock - Radio Shack PRO-94 Owner's Manual

2. Enter the channel number you want to select as the
priority channel, then press
appears to the right of the selected channel number.
3. Repeat Steps 1 and 2 for the channel in each bank
you want to program as a priority channel.
To review all priority channels (in ascending order only),
press , then repeatedly press
PROG
numbers of the priority channels.
To turn on the priority feature, press
scanning. PRI
designated priority channel every 2 seconds in each
bank. The bank number appears at the top of the dis-
play.
To turn off the priority feature, press
appears.
Notes:
• The priority feature must be turned off to listen to the
monitor memories or to use the data skip feature.
• If you have locked out all priority channels,
LOC OUt
feature. To unlock any desired priority channels, see
"Locking Out Channels" on Page 32.

USING THE KEYLOCK

To protect the scanner from accidental program chang-
es, turn on the keylock feature. When the scanner is
locked, the only controls that operate are
,
KEYLOCK VOLUME/OFF
To turn on the keylock, hold down
appears. To turn it off, hold down
disappears.
Note: Using keylock does not prevent the scanner from
scanning channels.
appears. Then the scanner checks the
appears when you activate the priority
, and
Special Features
PRIORITY (H/S)
PRIORITY
PRIORITY
PRIORITY
.
SQUELCH
KEYLOCK
KEYLOCK
.
P
to see the
during
. dis-
PRI
, ,
SCAN MAN
until K/L
until
K/L
33