Searching For And Temporarily Storing Active Frequencies - Radio Shack PRO-94 Owner's Manual

quency, then press
appears.
2. Use the number keys and
frequency (including the decimal point) you want to
store.
3. Press (
E
nel.
Notes:
• If you entered an invalid frequency in Step 2,
Error
times. Enter a valid frequency.
• The scanner automatically rounds the entered
number to the nearest valid frequency. For exam-
ple, if you enter 151.473 (MHz), your scanner
accepts it as 151.475.
Press
DELAY
end of a transmission before scanning proceeds to
the next channel (see "Delay" on Page 31). The
scanner stores this setting in the channel.
4. To program the next channel in sequence, press
and repeat Steps 2 and 3.
PROG
SEARCHING FOR AND TEMPORARILY
STORING ACTIVE FREQUENCIES
If you do not have a reference to frequencies in your ar-
ea, use a limit, direct, or service search (except weather
service search) to find a transmission. Also see "Guide
to the Action Bands" on Page 59.
Note: While doing a limit, direct, or service bank search,
press:
• if you want the scanner to pause 2 seconds
DELAY
after a transmission ends before it proceeds to the
next frequency (see "Delay" on Page 31).
• if you want the scanner to skip data signals
DATA
(such as fax or modem signals) and search only for
PROG
) to store the frequency into the chan-
SVC
appears and the scanner beeps three
to pause scanning 2 seconds after the
Operation
. The channel number
( to enter the
• MON/CLR)
25