Identifying A Trunked Frequency; Selecting The Edacs Talk Group Id Format; Edacs Talk Group Id Range Search - Radio Shack PRO-94 Owner's Manual

Identifying a Trunked Frequency

While ID scanning (looking for IDs within a trunked sys-
tem) or performing an ID search, press
current trunked frequency. (The frequency flashes
twice.) Then hold down
sounds and the ID and the frequency alternately appear.
To return to normal operation, press

Selecting the EDACS Talk Group ID Format

The EDACS system uses two group ID formats: Decimal
and Agency-Fleet-Subfleet (AFS). If you use a list of IDs
shown in one format (for example AFS) and the ID you
want to receive is in the other format (for example, deci-
mal), press
SVC (E)
ID appears in decimal format.
when the decimal format is selected.

EDACS Talk Group ID Range Search

To search EDACS IDs faster, set a range for the Agency
or Fleet listings. Enter the Agency (or the Agency and
the Fleet) listing numbers using the number keys, then
press
SRC (LIMIT)
Example 1
Agency = 01
Press
0 1 . SRC (LIMIT)
01--- appears during search.
Example 2
Agency = 01 Fleet = 01
Press
0 1 . 0 1 SRC (LIMIT)
01-01-
To stop an ID range search, press
44
9 9 9 9
to switch to the decimal format. The
. Note the following examples.
appears during search.
Trunking Operation
9 9 9 9
until a confirmation tone
9 9 9 9
.
flashes on the display
E
SRC (LIMIT)
to see the
.