Selecting A Preset Fleet Map; Programming A Fleet Map - Radio Shack PRO-162 User Manual

0 S4 S0
1 S4 S0
2 S0 S0
3 S0 S0
4 S0 S0
5 S0 S0
6 S0 S4
7 S0 S4

selecting a preset fleet map

1. Press FUNC, then press MENU to open menu mode.
2. Select the "Trunk Option" - "Select Bank" - "Select Trunk Sys".
3. Repeatedly press
ENT/PGM.
4. Repeatedly press
5. Repeatedly press
6. Repeatedly press
press ENT/PGM. Then the scanner returns to previous screen.
Note: When the scanner searches for transmissions, Type I fleet and subfleet IDs such as
100-12, 100-9, 000-12, or 400-8 display.
If you are still unable to listen to a complete conversation, then try another preset map.

programming a fleet map

1. Press FUNC, then press MENU to open menu mode.
2. Select the "Trunk Option" - "Select Bank" - "Select Trunk Sys".
3. Repeatedly press
ENT/PGM.
4. Repeatedly press
5. Repeatedly press
6. Repeatedly press
Then the next available block appear. For specifics about each size code, see preset fleet maps
table.
7. Press SCAN in open mode. If the scanner 's setting is close mode, press FUNC, then
•/DELAY/OPEN/CLOSE to switch open mode from close mode. The scanner exits the
trunking programming mode, tunes the data channel, and then searches using the map you
programmed.
Note: If you select size code S-12, S-13, or S-14, these restrictions apply:
• S-12 can only be assigned to Blocks 0, 2, 4, or 6
• S-13 can only be assigned to Blocks 0 and 4
• S-14 can only be assigned to Block 0
Since these size codes require multiple blocks, you will be prompted for the next available
block when you program a fleet map. For example, if you assign Block 0 as S-12, the
scanner prompts you for b2, the next block available, instead of b1. If you assign Block 0 as
S4 S0
S0 S0
S0 S0
S0 S0
S0 S0
S0 S0
S0 S0
S0 S4
or to select MOT 800 or MOT 800 CUSTOM system, and press
or to select Edit Fleet Map, and press ENT/PGM.
or to select the preset map, and press ENT/PGM.
or to select the name of the desired map (example E1P7), and
or to select MOT 800 or MOT 800 CUSTOM system, and press
or to select Edit Fleet Map, and press ENT/PGM.
or to select the custom map, and press ENT/PGM.
or to select the size code for first block, and press ENT/PGM.
S3 S4 S4
S3 S3 S4
S11 S10 S4
S4 S4 S11
S4 S4 S11
S0 S4 S0
S0 S12 S12
S0 (S12) (S12)
S3
S10
S10
S11
S0
S0
S12
(S12)
29