Entering Edacs Partial Talk Groups; Moving Talk Group Ids To Talk Group Id Lists - Radio Shack PRO-94 Owner's Manual

Note: To clear a mistake while entering an ID, press
then , then start over at Step 1.
0 E
5. Repeatedly press
scan list location you want to program. Then repeat
Step 4 to enter another ID.
6. When you finish, press

Entering EDACS Partial Talk Groups

You can enter partial group numbers in an EDACS talk
group. By entering only the desired portion of a group,
you can select either 128, 8, or 1 talk group. For exam-
ple, you might program every talk group in a police de-
partment by pressing just four keys.
Note: You cannot use partial talk groups in decimal
mode. (See "Selecting the EDACS Talk Group ID For-
mat" on Page 44.)
You can program a specific talk group such as 01-011
into the scan list memory. In AFS mode, you can pro-
gram the talk groups for an entire agency by pressing
corresponding keys.
For example:
You Press
01 . E
01 . 01 E
To lock out a large number of talk groups, press
after entering an agency or an agency and fleet into
memory.
Note: In AFS mode, agency numbers range from 00–15.
Moving Talk Group IDs to
Talk Group ID Lists
1. Press
MAN
PROG
E
all 01 groups
all 01 talk groups within
the 01 agency
. MAN appears.
Trunking Operation
8 8 8 8
or to select the next
to store the entries.
To Scan
L-OUT
49