To lock out an ID, press
pears. The ID is locked out, and the next active ID ap-
pears.
Unlocking a Single Talk Group ID
1. Hold down
beeps.
2. Repeatedly press
want to unlock.
3. Press
L-OUT (S/S)
next locked ID appears.
4. Press
SRC (LIMIT)
ously selected function.
Unlocking All Talk Group IDs
Hold down
L-OUT (S/S)
two short beeps, then press
at once. The scanner beeps twice. Press
sume the search.
Note: When you unlock all the IDs, the scan list appears.
Press
to scan the IDs stored in your scan lists or
SCAN
press
SRC (LIMIT)
lected function. For more information about scan lists,
see "Using Talk Group ID Lists" on Page 48.
Using Trunk Scanning Scan Delay
Sometimes a user might pause before replying to a
transmission. You can set the scanner to hold on an ID
for 5 seconds to wait for a reply. That way, the scanner
continues to monitor the ID for 5 seconds after the trans-
mission stops before resuming scanning.
Press
DELAY
DLY
appears when the scan delay is set to on.
Note: If you consistently miss responses even with scan
delay turned on, change the default system type or the
fleet map being used. See "Scanning Type I and Hybrid
Trunked Systems" on Page 51.
46
L-OUT (S/S)
L-OUT (S/S)
8 8 8 8
. The ID is unlocked, and the
to resume the scanner's previ-
while searching until you hear
to resume the scanner's previously se-
to turn trunk scanning scan delay on or off.
Trunking Operation
when the ID ap-
until you hear two short
9 9 9 9
or
to select the ID you
to unlock all the IDs
E (SVC)
L-OUT/SS
to re-