Search Skip Memory - Radio Shack PRO-94 Owner's Manual

vice bank, repeatedly press
the selected bank.
When the scanner stops on a transmission, quickly
press either:
• to stop searching and listen to the transmis-
HOLD
sion. HOLD
•
MON/CLR
current monitor memory.
To release the hold and continue searching, press
or hold down
(A/B)
you did not press
continue searching.
Note: Because there are many different frequencies al-
located to fire and police departments, it can take sever-
al minutes to search all the service frequencies.

Search Skip Memory

You can skip up to 50 specified frequencies during a limit
or direct search and up to 20 specified frequencies dur-
ing a service bank search. This lets you avoid unwanted
frequencies or those already stored in a channel.
Note: You cannot skip frequencies during WX service
search.
To skip a frequency, press
stops on the frequency during a limit, direct, or service
search. The scanner stores the frequency in memory
and automatically resumes the search.
To clear a single frequency from skip memory so the
scanner stops on it during a limit, direct, or service bank
search:
1. Press
HOLD
8 8 8 8
2. Press
appears.
3. Press
S/S
28
appears.
to store the displayed frequency into the
8 8 8 8 9 9 9 9
or
HOLD (A/B)
S/S (L-OUT)
to stop the search.
9 9 9 9
or to select the frequency.
. disappears.
L/O
Operation
. A bar appears above
SVC
for at least 1 second. Or, if
, simply press
when the scanner
HOLD
8 8 8 8 9 9 9 9
or to
L/O