Pptp + Static Ip Or L2Tp + Static Ip Connection - D-Link DAP-1360 User Manual

DAP-1360 Wireless N300 Access Point & Router
User Manual
or
PPTP + Static IP
Fill in the IP Address and Netmask fields.
In the Gateway IP address field, enter the IP address of the gateway used by this WAN
connection.
In the Primary DNS server field, enter the address of the primary DNS server.
As a rule, the specified settings are enough to configure a non-protected connection of the selected
type. If you need to specify additional settings, open the expert settings mode. To do this, use the
switch in the bottom left corner of the page.
L2TP + Static IP Connection
Figure 95. Configuring PPTP + Static IP WAN connection.
Page 127 of 270
Configuring Device (Router Mode)