Pptp + Static Ip Or L2Tp + Static Ip Connection - D-Link DAP-1155 User Manual
Wireless n 150 access point & router
Hide thumbs
Also See for DAP-1155:
- User manual (158 pages) ,
- Quick installation manual (33 pages) ,
- Quick install manual (3 pages)
Table of Contents
Advertisement
DAP-1155 Wireless N 150 Access Point & Router
User Manual
or
PPTP + Static IP
Fill in the IP Address and Netmask fields.
In the Gateway IP address field, enter the IP address of the gateway used by this WAN
connection.
In the Primary DNS server field, enter the address of the primary DNS server.
As a rule, the specified settings are enough to configure a non-protected connection of the selected
type. If you need to specify additional settings, open the expert settings mode. To do this, use the
switch in the bottom left corner of the page.
L2TP + Static IP Connection
Figure 77. Configuring PPTP + Static IP WAN connection.
Page 103 of 215
Configuring Device (Router Mode)
Advertisement
Table of Contents
