Ddns - D-Link DAP-1360 User Manual

DAP-1360 Wireless N300 Access Point & Router
User Manual

DDNS

On the Advanced / DDNS page, you can define parameters of the DDNS service, which allows
associating a domain name with dynamic IP addresses.
To add a new DDNS service, click the Add button. In the line displayed, you can specify the
following parameters:
Parameter
DDNS Service
Host name
User name
User password
Update period
After specifying the needed parameters, click the Apply button.
To edit parameters of the existing DDNS service, select a needed field in the relevant line of the
table, change its value, and click the Apply button.
To remove an existing DDNS service, select the checkbox located to the left of the relevant line in
the table and click the Delete button. Then click the Apply button.
Figure 184. The Advanced / DDNS page.
Select a DDNS provider from the drop-down list.
The domain name registered at your DDNS provider.
The username to authorize for your DDNS provider.
The password to authorize for your DDNS provider.
An interval (in minutes) between sending data on the access point's
external IP address to the relevant DDNS service.
Page 237 of 270
Configuring Device (Router Mode)
Description