DAP-1360 Wireless N300 Access Point & Router
User Manual
Dynamic IP Connection
In the Connection name field, specify a name for the connection for easier identification.
If your ISP has provided the addresses of the DNS servers, deselect the Obtain DNS server
addresses automatically checkbox and fill in the Primary DNS server field.
As a rule, the specified settings are enough to configure a connection of the selected type. If you
need to specify additional settings, open the expert settings mode. To do this, use the switch in the
bottom left corner of the page.
Figure 76. Configuring Dynamic IP WAN connection.
Page 106 of 270
Configuring Device (Router Mode)