D-Link DAP-1360 User Manual page 80

DAP-1360 Wireless N300 Access Point & Router
User Manual
The following buttons are available on the page:
Control
Save
Reboot
Factory
Backup
Browse
Logout
Actions of the Save, Reboot, Factory, Backup, and Logout buttons also can be performed via
the top-page menu displayed when the mouse pointer is over the System caption.
Click the button to save settings to the non-volatile memory. Please,
save settings every time you change the device's parameters.
Otherwise the changes will be lost upon hardware reboot of the
access point.
Click the button to reboot the device. All unsaved changes will be
lost after the device's reboot.
Click the button to restore the factory default settings. Also you can
restore the factory defaults via the hardware WPS/RESET button
located on the back panel of the
section, page 11).
Click the button to save the configuration (all settings of the
point) to your PC. The configuration backup will be stored in the
download location of your web browser.
Click the button and follow the dialog box appeared to select a
previously saved configuration file (all settings of the
located on your PC and upload it.
Click the button to exit the web-based interface.
Page 80 of 270
Configuring Device (Access Point Mode)
Description
access point (see the Back Panel
access
access point)