Wi-Fi; Basic Settings - D-Link DAP-1360 User Manual

DAP-1360 Wireless N300 Access Point & Router
User Manual

Wi-Fi

In this menu you can specify all needed settings for your wireless network.

Basic Settings

On the Wi-Fi / Basic settings page, you can enable the wireless local area network (WLAN) of
the access point and configure its basic parameters.
Parameter
Enable Wireless
BSSID
Hide Access Point
SSID
Country
Figure 168. Basic settings of the wireless LAN.
The checkbox enables Wi-Fi connections. If you want to disable
your WLAN, deselect the checkbox.
The unique identifier for your Wi-Fi network. You cannot change the
value of this parameter, it is determined in the device's internal
settings.
If the checkbox is selected, other users cannot see your Wi-Fi
network. (It is recommended not to select this checkbox in order to
simplify initial configuration of your WLAN.)
A name for the WLAN. By default, the value DAP-1360 is
specified. It is recommended to specify another name for the
network upon initial configuration (use digits and Latin characters).
The country you are in. Select a value from the drop-down list.
Page 210 of 270
Configuring Device (Router Mode)
Description