DAP-1360 Wireless N300 Access Point & Router
User Manual
System
In this menu you can do the following:
change the password used to access the
•
save the current settings to the non-volatile memory
•
reboot the access point
•
create a backup of the
•
restore the
access
•
restore the factory default settings
•
view the system log
•
update the firmware of the
•
configure automatic notification on new firmware version
•
configure automatic synchronization of the system time or manually configure the date and
•
time for the
access point
check availability of a host on the Internet through the web-based interface of the
•
point
trace the route to a host
•
allow or forbid access to the
•
switch the device to the other mode.
•
access
point's configuration
point's configuration from a previously saved file
access point
access point
Page 77 of 270
Configuring Device (Access Point Mode)
access
point's settings
via TELNET
access