Configuring Wireless Connection - D-Link DAP-1360 User Manual

DAP-1360 Wireless N300 Access Point & Router
User Manual

Configuring Wireless Connection

Figure 111.
If you are not going to use
button. Click the Next button and then
the button, the Home / Information page opens.
If you want to connect portable devices to the network of the access point via wireless connection,
select the Access point choice of the Mode radio button.
If you want to configure DAP-1360 as a repeater to connect to a wireless access point, select the
Repeater choice of the Mode radio button. Click the Next button.
If you want to configure DAP-1360
select the Client choice of the Mode radio button. Click the Next button.
Selecting the operating mode for the wireless
the wireless connection, select the Turn off choice of the Mode radio
click the Apply button on the opened page. After clicking
the access point
Page 145 of 270
Configuring Device (Router Mode)
network.
Click the Next button.
as a client to connect to a wireless access point,