Dynamic And Static Ip Addressing On The Ap - D-Link DBA-1210P User Manual

Section 2 - Installation

Dynamic and Static IP Addressing on the AP

When you power on the access point, the built-in DHCP client searches for a DHCP server on the network in order to obtain
an IP Address and other network information. If the AP is not able to be assigned a DHCP IP on the network, you can manually
recon gure the static IP address and relevant network setting through device Administration Web UI or CLI interface.
To manually con gure network setting through device Administration Web UI, please refer to "Web-based Con guration Utility"
on page 13
You can manually con gure network setting through device CLI as well by any of the following methods:
• Serial Port Connection to the AP
• Telnet Connection to the AP
• SSH Connection to the AP
Please refer to "Device CLI Con guration" on page 17 for more information on how to con gure the DBA-1210P using the CLI.
Caution! If you do not have a DHCP server on your internal network, and do not plan to use one, the rst thing you must do
after powering on the access point is to change the connection type from DHCP to static IP and assign a new static IP address
to the AP.
Caution! The default login information is admin/admin for both the Web UI and CLI. Please note that the credentials might
have been changed through the D-Link Business Cloud.
D-Link DBA-1210P User Manual 9