D-Link DAP-1360 User Manual page 24

DAP-1360 Wireless N300 Access Point & Router
User Manual
6. Search for available wireless networks.
7. In the opened Wireless Network Connection window, select the wireless network DAP-
1360 and click the Connect button.
After that the Wireless Network Connection Status window appears.
Now you can connect to the web-based interface of DAP-1360 for configuring all needed
parameters. To gain access to an external network (to the Internet), you also need to specify the
default gateway and the addresses of DNS servers.
If you perform initial configuration of the access point via Wi-Fi connection, note that
!
immediately after changing the wireless default settings of the access point you will need
to reconfigure the wireless connection using the newly specified settings.
Figure 12. The Network Connections window.
Page 24 of 270
Installation and Connection