Firmware Upgrade - D-Link DAP-1360 User Manual

DAP-1360 Wireless N300 Access Point & Router
User Manual

Firmware Upgrade

On the System / Firmware upgrade page, you can upgrade the firmware of the
configure the automatic check for updates of the
!
Upgrade the firmware only when the
connection.
The current version of the
corner of the page.
By default, the automatic check for the
update is available, a notification will be displayed in the top right corner of the page.
To disable the automatic check for firmware updates, in the Remote update section, deselect the
Check for updates automatically checkbox and click the Apply settings button.
To enable the automatic check for firmware updates, in the Remote update section, select the
Check for updates automatically checkbox and click the Apply settings button. By default,
in the Remote server URL field, the D-Link update server address (fwupdate.dlink.ru) is
specified.
You can upgrade the firmware of the
remotely (from the update server).
Figure 59. The System / Firmware upgrade page.
access point's firmware is displayed next the D-Link logo in the top left
access
access point
Page 83 of 270
Configuring Device (Access Point Mode)
access point's firmware.
access point is connected to your PC via a wired
point's firmware updates is enabled. If a firmware
locally (from the hard drive of your PC) or
access point and