D-Link DAP-1360 User Manual page 209

DAP-1360 Wireless N300 Access Point & Router
User Manual
Also you can create a MAC-IP pair for a device connected to the access point's LAN at the moment.
To do this, select the relevant value from the Known IP/MAC addresses drop-down list (the
fields of the section will be filled in automatically).
When all needed MAC-IP pairs are specified, click the Apply button.
Existing MAC-IP pairs are displayed in the table of the Static DHCP section. To remove a pair,
select the checkbox in the relevant line in the table and click the Remove button. Then click the
Apply button.
Page 209 of 270
Configuring Device (Router Mode)