D-Link DAP-1360 User Manual page 232

DAP-1360 Wireless N300 Access Point & Router
User Manual
To configure the access point as a client, select the Enable client checkbox. When the checkbox is
selected, the following fields are displayed on the page:
Parameter
SSID
BSSID
Network Authentication
When the Open or Shared authentication type is selected, the following fields are available:
Parameter
Enable Encryption WEP
Figure 182. The page for configuring the client mode.
The name of the network to which the access point connects.
The unique identifier of the network to which the access point
connects.
The authentication type of the network to which the access point
connects.
The checkbox activating WEP encryption. When the checkbox is
selected, the Default Key ID field, the Encryption Key WEP as
HEX checkbox, the WEP key length drop-down list, and four
Encryption Key WEP fields are displayed on the page. For the
Shared authentication type the checkbox is always selected.
Page 232 of 270
Configuring Device (Router Mode)
Description
Description